8 Channels Fiber Optic Video & 1 Bi-Di Data Transmission

Video	Audio	Data	PDF Datasheets	A&E Datasheets	Installation Manual
	--		VOS-8010FDT/R	VOS-8010FDT/R	VOS-8010FDT/R

System Design

Fiber Optic Video VOS-8010FDT/R provides for the digital transmission of 8 Channels Composite Video,1 Bi-direction data,and data support RS485,RS232,RS422. no audio.
Stand-alone or rack-mount. All units of VOS-8010FDT/R come in an insert card version.The cards can be inserted into our 14-slot,19inch 4U rack-mountable card cage (VOS-CH04).One 8-Ch video card occupy two slots.
Single-Mode or Multi-Mode,VOS-8010FDT/R only can support FC or ST Optical connector, can be used in Daisy-Chain system (Need to customize) The Transmission distance range according to the Optical Budget.Manufacturer's standard is: Single-mode 20km.

Features

• Support Point-to-Point or Daisy-Chain connection
• Uncompressed Digital Composite Video over one fiber
• Compatible with all PAL, NTSC,SECAM Video Systems
• Data support RS485(2-wire or 4-wire),RS232,RS422, Contact Closure
• Multimode Fiber Support for Distances up to 1.2 km
• Single-Mode Fiber Support for Distances up to 100 km
• LED Status Provide Rapid Indication of Operating Parameters
• No EMI or RFI and no ground loops
• Support Coarse Wavelength Division Multiplexing (CWDM)
• Stand alone or rack-mount
• Produce according to customer's specifications,providing OEM

Specifications

• Video
Number of Channels:	8 Channels Video
Video input/output impedance:	BNC 75 Ω
Video input/output Compatibility:	PAL, NTSC,SECAM
Video input/output voltage:	1.0 Volt p-p
Bandwidth:	6.5MHZ
Bit Resolution:	8-Bit Digital Transmission
Differential Gain:	< 1.5%
Differential Phase:	< 1.5 °
Tilt:	< 5%
Signal-to-Noise Ratio(SNR):	> 67 dB
• Data
Data Formats::	RS485(2-wire or 4-wire),RS232,RS422,Contact Closure
Data Rate:	DC to 115.2Kbps
Bit Error Rate::	10E-9
• Connectors
Video:	75 Ohm BNC (Gold Center Pin)
Data:	RJ-45
Optical:	FC (standard), ST Optional
Stand-Alone Power:	Screw terminal block
Rack Power:	AC line cord
• Electrical & Mechanical
Input Power Requirements:	DC 5V@3A
Power Adapter:	AC 100V~240V,AC/DC 12V~48V Optional
Power Consumption:	< 5W
Stand-Alone Dimensions:	176.5mm × 158mm × 36mm
Card for 4U Rack Dimensions:	145mm × 170mm × 45.4mm (two slots)
Shipping Weight:	2.5kg (include Transmitter & Receiver)
• Environmental
Operating Temperature:	-40°C ~ +75°C
Storage Temperature:	-40°C ~ +85°C
Relative Humidity:	0% ~ 95% (non-condensing)
MTBF:	>100,000 hours

Ordering Information & Optical Specifications

Model Number		Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
Transmitter	Receiver	Fiber Mode	Wavelengths	Optical Power Budget	Maximum Transmission Distance
VOS-8010FDMT	VOS-8010FDMR	Multi-Mode	850nm/1310nm	10dB	1.2km
VOS-8010FDST	VOS-8010FDSR	Single-Mode	1310nm/1550nm	12dB	20km
VOS-8010FDST-4	VOS-8010FDSR-4	Single-Mode	1310nm/1550nm	18dB	40km
VOS-8010FDST-6	VOS-8010FDSR-6	Single-Mode	1310nm/1550nm	25dB	60km
Note: • The Optical Power Budget data fit Mulit-mode(62.5/125 μm),Single-Mode(9/125 μm). • When using 50/125 μm multimode fiber, subtract 3 dB from the optical power budget. • Optical transmission distance is limited to optical loss of the fiber and any additional loss introduced by connectors, splices and patch panels. • Maximum transmission distance is also limited by fiber bandwidth. • Power adapter is manufactured by third party and is supplied with fitted screw-terminal output cables.Power adapter included (for standalone) US, European, UK or Australian power plug. • Please feel free to consult factory for any special requirement and customization